Find the solution according to the job
Our brands
Advanced diagnostics with VCMI2, 13.7″ display and measuring tools for complex service work.
Advanced diagnostics, with live data analysis and network topology.
Tablet for diagnostics, active tests, coding and advanced service functions.
Wireless diagnostics for all systems, live data and active tests.
Wireless diagnostics with MaxiVCI V150, code reading and maintenance functions.
Wired solutions for system monitoring, active testing and service work.
Practical OBDII reader for fault codes and basic vehicle checks.
Professional Launch diagnostic tablet with coverage of vehicle systems, active tests and service functions. Functions extend by device and license.
X-431 professional tablet with SmartLink for system diagnostics, service functions and J2534 communication. Supports CAN FD and DoIP depending on configuration and vehicle.
LAUNCH SmartLink C V2.0 interface for local or remote diagnostic communication with compatible systems. Requires LAUNCH tablet or platform and associated licenses; the interface alone does not include all the functions of a scanner.
X-431 series diagnostic tablet for checking vehicle systems, reading live parameters and service work. The connection to the vehicle is made through the VCI interface of the package.
Wireless diagnostics with DBSCar VII Bluetooth: reading and erasing errors, live data, active tests and ECU coding on supported vehicles.
Compact OBD diagnostic interface for communication with compatible LAUNCH hardware and software. Suitable for configurations where a separate VCI module is required.
EDIAG Plus Bluetooth diagnostic interface for phone or tablet. Provides systems diagnostics, live data, active tests and service functions on supported vehicles.
Compact 5-inch tablet for diagnosing motorcycles and supported powersport vehicles. It reads and clears errors, displays live parameters and performs active tests and service procedures according to the model.
7-inch diagnostic tablet for motorcycles, ATV/UTVs and snowmobiles supported. Combines systems control, live data, active tests and maintenance functions on one larger screen for service work.
VNCI 6154B interface for diagnostic connection of supported vehicles with PC and compatible ODIS software. Features depend on vehicle, drivers, firmware and software license.
Diagnostic interface for Volkswagen Group vehicles. Works with ODIS Service and ODIS Engineering, with USB or Wi-Fi connection and support for DoIP and CAN FD.
VAS5054A diagnostic interface for supported vehicles of the VAG group, with Bluetooth or USB connection to the computer.
VNCI diagnostic interface for Porsche, compatible with PIWIS III. Used for diagnostics, live data and component tests, depending on model and software configuration.
VCI C6 diagnostic interface for supported Mercedes-Benz vehicles.
SDconnect C4 interface for diagnostics of supported Mercedes-Benz vehicles, with the corresponding XENTRY or DAS software.
Interface for diagnostics and programming of BMW and MINI vehicles with compatible software. The connection to the computer is made through the LAN network, while the connection to the vehicle is made through the diagnostic cable.
K+DCAN USB cable for diagnostics and work with supported BMW E-Chassis platforms. 2n1 function for K-Line and D-CAN.
HEX-NET clone diagnostic interface for use on compatible Volkswagen, Audi, SEAT and Škoda models.
HEX-V2 clone diagnostic interface, with USB cable, for compatible models of the Volkswagen group.
Diagnostic interface for supported Renault and Dacia vehicles.
USB/OBD interface for diagnostics and configuration on Renault and Dacia models.
Diagnostic interface for supported Peugeot and Citroën models.
OBD interface for diagnosing supported Opel models, with USB connection to computer.
Diagnostic interface for Jaguar Land Rover. Supports DoIP communication and work with compatible software; verify year, model and license.
Compact OBD–USB interface for diagnostic communication and working with ECUs via J2534 compatible software. Suitable for use with computer in vehicles and supported units.
Multibrand diagnostic interface for cars and commercial vehicles. Connects to the computer via Bluetooth or USB; coverage depends on software version and license.
USB interface for diagnostics with ForSCAN on supported Ford and Mazda vehicles. Cable connection from the OBD2 port to the computer.
Scania VCI3 diagnostic interface for use with PC and compatible software. Provides connectivity to the vehicle's electronic systems for diagnostics and live data, according to model and software functions.
Ethernet-OBD cable for diagnostics and coding on compatible BMW F, G and I models. Connects the OBD port of the vehicle to the RJ45 network port of the computer or the corresponding adapter.
Key programming with Smart and Expert modes, system diagnostics and service menu.
Programmer for transponders, EEPROM and MCU, for work with compatible MaxiIM devices.
Autel APB112 smart key simulator for supported IMMO procedures, including 46 chip emulation and some Toyota systems. Used with compatible Autel IMMO devices, not as a standalone programmer.
Autel G-BOX3 adapter for supported Mercedes DAS3 CAN EIS/EZS procedures and ISN operations on selected BMW DME/DDE modules. Requires compatible Autel IMMO equipment; it is not a standalone programmer.
Autel IMKPA adapter kit to work with supported IMMO switches and modules. Used with compatible Autel programmers and devices; is not a standalone developer.
Professional tablet for key and IMMO programming, remote control generation and transponder work, with large screen for service use.
IA800 Extended Package for Optical Positioning and ADAS Calibration. Includes Basic Kit contents, additional LDW targets for several vehicle brands and target holder. In the package catalog it is named Full Kit.
IA800 base package for optical frame positioning and ADAS calibration by vehicle. Includes 2nd generation frame, camera kit, LDW Volkswagen and Mercedes targets, and ACC mirror.
Calibration accessory for vehicle Night Vision systems supported by Autel ADAS procedures.
For configuration, package and compatibility of this item, contact us. Pictures and full details will be added soon.
CSC0605-01 Doppler Radar Calibration Box for ADAS procedures supported. Usage depends on the appropriate calibration frame and setup.
TPMS sensor activation, diagnostic and relearning procedures equipment.
TPMS sensor with metal valve; the variant is selected according to the vehicle and system.
TPMS sensor with rubber valve; the variant is selected according to the vehicle and system.
Equipment for measuring tire wear and checking brake discs.
Bluetooth adapter for diagnostics and live data in the OBDeleven app.
Phone diagnostics via Bluetooth, with the OBDeleven app on iOS or Android.
Carista OBD adapter for use with the phone app. Provides diagnostics, live data and service or customization functions for supported vehicles. Features depend on vehicle and app plan.
vLinker adapter for use with BimmerCode on supported BMW and MINI vehicles. Adapter version and phone compatibility are checked before ordering; functions depend on vehicle model and application.
Diagnostics, coding and customization for Mercedes-Benz through the MBito app on iOS and Android. Reading and clearing errors, as well as enabling functions on supported models.
Specialized equipment for SRS/airbag modules and erasing crash data on supported units. Provides error information reading, EEPROM/FLASH operation, and Bench connection instructions.
Expansion kit with EVDiag Box, adapters and cables for battery pack diagnostics on supported models. The MaxiSYS device is sold separately.
Universal bracket from Magicmotorsport for stable and accurate connections to ECUs and TCUs in Boot, BDM and JTAG modes. The LED-illuminated base and color-coded probes make working with contact points easier.
Portable bracket from Magicmotorsport for stable connection to ECUs and TCUs while programming in Boot, BDM and JTAG modes. Polycarbonate panel, two articulated arms and adjustable probes help with precise positioning.
BDM table / frame with adjustable brackets and LED lighting, for practical positioning of probes when working with ECU units.
Magicmotorsport adapter kit for programming Bosch, Siemens, Marelli and Delphi ECUs in BDM mode. The adapters have LED lighting and a microchip that enables FLEX to identify the ECU model.
Set of BDM adapters for working with probes and the corresponding frame when programming supported ECUs.
The Flexbox from Magicmotorsport is used to connect the ECU and TCU units to the programmer or diagnostic tool. It has four connection modes and touch controls.
Magic Trolley Maxi work cart with four shelves, steel construction and wheels with brakes. Organizes the programmer, laptop and cables next to the vehicle, with a total load of up to 100 kg.
Compact Magic Trolley for organizing service equipment and tools. Four shelves, two removable trays for small parts and four wheels, two of them with brakes.
Professional 12 V charger and stabilizer for lead and lithium batteries. The MagicCHARGER 100 CNT helps maintain a stable voltage during vehicle diagnostics and programming.
Power supply for FLEX by Magicmotorsport, complete with cables and adapters for European, British and American plugs.
Red OBD cable from Magicmotorsport for connecting the FLEX to the vehicle via the OBD port, in systems using CAN and K-Line communication.
Green OBD cable from Magicmotorsport for connecting FLEX to vehicles using ENet communication.
Magicmotorsport cable for connecting the FLEX programmer to the OBD diagnostic port of trucks and buses with supported electronic units.
FLEX cable kit for bench connection of supported BMW ZF 6HP, 8HP and DKG transmissions. Used with Flexbox; reading and writing depend on the active protocol and license.
Cable set for connecting VAG TCUs to the F port of the Flexbox. Fast, secure connection and less risk of errors while working.
Magicmotorsport cable for connecting FLEX to Mercedes-Benz Bosch MDG1 units in Bench mode.
Set of 16 colored silicone cables for FLEXBox. It is used with suitable adapters for connecting to ECU and TCU units.
FLEX FLK43 kit with four types of G, H, I and L pin adapters for FLK35 cables. Expands connection possibilities with supported Bosch, Continental and Cummins modules, according to protocol guidance.
Female OBD cable from Magicmotorsport for Flexbox, with 44-pin connector. Enables Flexbox touch controls for selecting four work modes during Bench programming.
Set of short terminal adapters for Bench connection with standard FLEX cables. They are placed at the edge of the existing connector; different colors and sizes help to select the right connection to the ECU.
Bench cable set 50 cm with integrated connectors for connecting ECUs to Flexbox. Color-coded cables make it easier to identify connections without having to fit separate terminal adapters each time.
MICRO terminal adapters for connecting universal Bench FLEX cables with small contacts of Bosch MG1/MD1 units. The colored cables help identify the connections and match the corresponding connector according to the ECU schematic.
MICRO pin set for Bench connection to ECUs that have very small contacts, including MG1/MD1 configurations. The adapters are connected to the end of the existing connector and help to make the contact in narrow spaces.
Bench universal cable set with 42 pin adapters A–G for connection to ECU units. Colored cables and differently shaped adapters help organize connections during diagnostics and programming.
Adapter for FLEX Boot Glitch procedure on supported Bosch MDG1 units with Aurix TC2xx processors. Enables connection to required E-port signals, with extension cable, 2mm banana plug and crocodile clip.
Short terminal cables with different connector sizes, for connecting the existing breakout cable to the appropriate ECU terminals.
Silicone protective case for AutoTuner Tool. It helps protect against shocks and provides better grip during use. AutoTuner device not included.
CAN FD adapter for compatible Autel diagnostic configurations. It is placed between the diagnostic link and the vehicle using the CAN FD protocol.
Bluetooth communication interface that connects to the vehicle's OBD2 port and works with compatible Autel tablets.
Autel MaxiVCI V200 interface for connecting the vehicle to a compatible Autel tablet via Bluetooth or USB. Coverage and features depend on tablet and software; it is not a standalone scanner.
OBD diagnostic main cable for Autel MS909, MS919, Ultra and CV compatible configurations. Connects the vehicle to the VCI interface; the connector model must match your device.
Diagnostic cable connecting the Autel MX808 / MX808S tablet to the vehicle's OBD2 socket.
Ethernet cable for diagnostic connections of BMW F-Series models with compatible Autel configurations. Before ordering, check the interface model and the shape of the connectors.
AUTEL Accessory: FCA 12+8 Universal Adapter Cable Adapter. Variant and compatibility are confirmed by device and vehicle.
Nissan 16+32-pin adapter for connecting compatible diagnostic equipment to vehicles using this configuration. Compatibility is checked by model, year and diagnostic interface.
Adapter with circular connection BMW 20-pin to OBD 16-pin, for diagnostics of vehicles compatible with Autel equipment. It is used together with the diagnostic interface; it does not work as a standalone device.
Mercedes 38-pin adapter for connecting vehicles with a circular diagnostic plug to a compatible Autel system. The cable accommodates the physical connection; functions are determined by device and vehicle.
CV Benz 14-pin adapter for Mercedes commercial vehicles with this diagnostic link. Requires compatible CV diagnostic equipment; it is not a standalone diagnostic interface.
Inspection camera with USB connection for Autel diagnostic tablets. 8.5 mm head, Full HD resolution and LED lighting for controlling hard-to-see areas.
Inspection camera for viewing hard-to-reach areas, with compatible equipment.
Autel PowerScan PS100 electrical tester for measuring voltage, resistance and continuity in vehicle circuits. It helps in checking the supply and mass as well as finding electrical problems.
Replacement LCD panel for Autel MaxiSYS MS909. It's the inner screen, not the outer touch glass. The panel code and connector are checked before ordering, because there are different versions of the screen.
DoIP cable adapter for compatible LAUNCH configurations. Enables diagnostic connection via Ethernet when the device and vehicle support this protocol.
OBD2 extension cable with 16 pins, male-female, for more practical connection of the diagnostic interface to the vehicle port. The flexible cable helps work in tight spaces and avoids placing the VCI directly in the port.
16-pin OBD2 main cable for connecting the vehicle to the compatible MB SD Connect C4/C5 multiplexer. There is an OBD2 connector and a circular connector on the side of the diagnostic device.
16-pin OBD diagnostic cable for connecting the XENTRY Diagnosis VCI to the vehicle. There is an OBD2 connector on the vehicle side and a special connector on the VCI device side.
Ethernet / LAN cable for connecting the MB SD Connect C4/C5 multiplexer to the computer. Suitable as a replacement or spare cable for communication with diagnostic equipment.
USB-A to USB-B cable for connecting the MB VCI interface to the computer.
Replacement USB cable with fixing screw for VCDS compatible interface. This is just the cable, without the diagnostic tool.
Replacement OBD2 cable for Autocom CDP+, for connecting the diagnostic device to the vehicle.
S.1279 adapter for Lexia / Diagbox diagnostic connection on supported Peugeot and Citroën models.
Replacement USB cable for connecting the Lexia 3 / PP2000 interface to the computer.
Qwik-Connect terminal adapter set for connecting FLEX cables to Scania S6/S7/S8 desktop ECUs. Colored cables help identify connections.
Splitter cable with one OBD2 input for the vehicle and two OBD2 outputs for connected devices.
Hard case from Magicmotorsport for storing and transporting FLEX tools, cables and accessories. It has four locking points and carbon-look trim. The internal organization depends on the variant.
Compact ThinkPad laptop for everyday use and compatible diagnostic software. The processor, RAM, SSD, display and unit condition are confirmed for the configuration we have in stock.
Lenovo ThinkPad compact laptop, with AMD platform and practical format for everyday work. The processor, RAM, SSD, display and unit condition are confirmed for the configuration we have in stock.
2n1 ThinkPad X1 Yoga Gen 8 laptop, with 360° hinge for use as a laptop, tablet or stand. The processor, RAM, SSD, display and unit condition are confirmed for the configuration we have in stock.
Practical form factor Toughbook laptop for service work and use with compatible diagnostic equipment. The processor, RAM, SSD, display and unit condition are confirmed for the configuration we have in stock.
Panasonic Toughbook laptop for professional use and compatible diagnostic software. The processor, RAM, SSD, display and unit condition are confirmed for the configuration we have in stock.
Full FLEX Master software package for supported ECU and TCU protocols, in OBD, Bench and Boot modes.
ECU Master activation for cars, vans and motorcycles in OBD and Bench modes.
Complete FLEX Slave software package for ECU and TCU, with protocols and connection modes supported by the device.
Master Activation for reading and writing TCU units in OBD, Bench and Boot, according to supported protocols.
Slave ECU activation for cars, vans and motorcycles in OBD and Bench modes.
Slave activation for reading and writing TCU units in OBD, Bench and Boot, according to supported protocols.
Master Activation for supported motorcycle ECUs and modules, in OBD, Bench and Boot.
Module for the FLEX Master account that enables connecting Slave users and encrypting or decrypting their files.
Slave activation for supported motorcycle ECUs and modules, in OBD, Bench and Boot.
12-month renewal for FLEX Full Master configuration, with protocols and services according to active licenses.
12-month renewal for FLEX OBD Master configuration, with protocols and services according to active licenses.
12-month renewal for FLEX Full Slave configuration, with protocols and services according to active licenses.
12-month renewal for FLEX OBD Slave configuration, with protocols and services according to active licenses.
Software update subscription for MaxiCheck MX900. Duration: 12 months.
Software update subscription for MaxiDAS DS900-BT. Duration: 12 months.
Software update subscription for MaxiIM IM508S. Duration: 12 months.
Software update subscription for MaxiIM IM608. Duration: 12 months.
Software update subscription for MaxiSYS MS906 MAX. Duration: 12 months.
Software update subscription for MaxiSYS MS906 Pro. Duration: 12 months.
Software update subscription for MaxiSYS MS908S3. Duration: 12 months.
Software update subscription for MaxiSYS MS909 S2. Duration: 12 months.
Software update subscription for MaxiSYS MS909. Duration: 12 months.
Software update subscription for MaxiSYS Ultra S2. Duration: 12 months.
FLEX Bike Master setup 12-month renewal request. The respective package is confirmed by serial number and active licenses.
FLEX Bike Slave setup 12-month renewal request. The respective package is confirmed by serial number and active licenses.
FLEX TCU Master Configuration 12-Month Renewal Request. The respective package is confirmed by serial number and active licenses.
FLEX TCU Slave configuration 12-month renewal request. The respective package is confirmed by serial number and active licenses.
Professional programmer from Magicmotorsport for reading and writing engine units (ECU) and transmission units (TCU). It is used to repair electronic modules and optimize vehicle performance.
ECU and TCU programmer for reading and writing via OBD, Bench or Boot, depending on the unit supported. Available as Master or Slave; the Slave variant cooperates with the corresponding Master. AutoTuner updates are available without a recurring subscription.
Professional programmer from DFB Technology for reading and writing engine ECU and transmission TCU units. Works through OBD, Bench and Open Boot / JTAG modes, depending on the unit and configuration enabled.
Programmer for reading, writing and cloning of supported ECU/TCU units, as well as working with EEPROM memory and MCU processors. Desktop solution for specialists in vehicle electronics and IMMO modules.
Full version for cars and motorcycles: ECM + TCM + BODY. For reading, writing, cloning and recovery of supported electronic drives, with connection instructions according to the protocol.
Professional computer-based ECU programmer for reading, writing and cloning supported units in cars, motorcycles and commercial vehicles.
FBS3 key programmer and immobilizer. It also supports the Renew of some ECU units and EGS 7G transmission, according to the module and software.
CG FC200 programmer for work with supported ECU units through software on the computer. Used for reading, writing and backup; functions and connections vary by unit, adapters and license.
MPPS V18 programming interface with USB / OBD connection for work with supported ECU units.
ECU read and write interface via OBD and, depending on configuration, Tricore/Boot cable. Check the ECU variant and support before work.
Professional LAUNCH module for key programming and IMMO systems. Enables reading and writing of chips, EEPROM and MCU, as well as working with supported ECU/TCU modules. Used with compatible X-431 equipment; functions depend on vehicle and configuration.